Routing
Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
Contributor
Posts: 10
Registered: ‎12-02-2016
0 Kudos

mx104 version

Hi all,

 

I have couple mx104 routers and I don't know which version they have (mx104-mx5/full mx104).

How I can know this information from CLI?

 

 

BR

Roman Malkov (jncip-ent, jncis-sp)
Distinguished Expert
Posts: 5,020
Registered: ‎03-30-2009
0 Kudos

Re: mx104 version

Not sure but check the output of 

 

show chassis hardware models

Steve Puluka BSEET
Juniper Ambassador
Senior IP Engineer - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
JNCIA-Junos JNCIS-SEC JNCIP-SEC JNCSP-SEC
JNCIS-FWV
JNCDA JNCDS-DC JNCDS-SEC
JNCIS-SP
ACE PanOS 6 ACE PanOS 7
http://puluka.com/home
Super Contributor
Posts: 188
Registered: ‎10-14-2008
0 Kudos

Re: mx104 version

Full MX104 will have system licenses installed to activate the onboard 10G ports.

cmyers@lab-mx104-1.re0> show system license 
License usage: 
                                 Licenses     Licenses    Licenses    Expiry
  Feature name                       used    installed      needed 
  scale-subscriber                      0         1000           0    permanent
  scale-l2tp                            0         1000           0    permanent
  scale-mobile-ip                       0         1000           0    permanent
  MX104-2x10Gig-port-0-1                0            1           0    permanent
  MX104-2x10Gig-port-2-3                0            1           0    permanent

Licenses installed: 
  License identifier: <deleted>
  License version: 2
  Features:
    MX104-2x10Gig-port-0-1 - MX104 2X10Gig Builtin Port(xe-2/0/0 & xe-2/0/1) upgrade
      permanent
    MX104-2x10Gig-port-2-3 - MX104 2X10Gig Builtin Port(xe-2/0/2 & xe-2/0/3) upgrade
      permanent

If I remember correctly, the onboard 10G ports on the MX104 aren't even visible until the license is applied; there was another forum post on that a year or so back.

 

-Chad