03-04-2008 09:41 AM - edited 03-04-2008 09:44 AM
I just insert retrun PIC (PE-4GE-TYPE1-SFP-IQ2) at lab m7i and has pc-0/3/0 interface.
Try to delete pc-x/x/x interface but cannot.
juniper@rmatest-m7i# delete interfaces pc-0/3/0
warning: statement not found
juniper@rmatest-m7i# run show interfaces pc-0/3/0 brief
Physical interface: pc-0/3/0, Enabled, Physical link is Up
Type: PIC-Peer, Link-level type: PIC-Peer, MTU: Unlimited,
Clocking: Unspecified, Speed: 800mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps Internal: 0x4000
Logical interface pc-0/3/0.16383
Flags: Point-To-Point SNMP-Traps Encapsulation: PIC-Peering
inet 10.0.0.1 --> 10.0.0.19
how to erase pc-x/x/x interface?
03-05-2008 01:04 AM
It is an interface that is associated with each installed IQ2 type PIC. It is required and it cannot be deleted so please don't try :-) Just ignore it. It should be there.
03-05-2008 09:35 AM
I am trying to take CoS advantage with IQ2 PIC.
Also I want to see more product detail with PE and PB 8 port.
Do you have any suggest URL?
03-05-2008 01:02 PM
Pure product information on IQ2 PICs can be found at http://www.juniper.net/products/modules/100163.
CoS information is available in the class-of-service section of our online documentation. IQ2 PICs have some particular extra functionality not available on other PICs (e.g. hierarchical shapers) while having certain limitations (only one high priority queue) so you need to look carefully when deciding on IQ2 PICs. They also have oversubscription within individual PICs.
06-23-2011 05:37 AM
> Hi, can you pls point to documentation which explains the use of pc-*/*/* interface? Is it used for hiearchicial shapers?
No, the pc interface is not usable at all
It is just an 'internal' interface, used by Juniper router for booting/managing IQ PICs
It is automatically created and used as soon as you bring online an IQ PIC, but cannot be configured and should not be touched.
Hierarchical shaping is configured (on interfaces which support it) referring directly to ge-x/y/z
Please see here for details:
I hope it helps,