Routing
Reply
Visitor
atou
Posts: 2
Registered: ‎11-11-2009
0

vlan-based shaping

Hello,

 

I have an MX-80 with a trunk port where I want to do shaping on vlan-level.

Probably this is possible when defining each individual vlan as a different unit on the interface and doing the same in the CoS config part.

Is there another way to do this?

 

Any help would be much appreciated.

 

Kind regards,

 

Anthony

 

Recognized Expert
JNPRdhanks
Posts: 301
Registered: ‎11-01-2010

Re: vlan-based shaping

This may be a good place to start:

 

http://www.juniper.net/us/en/local/pdf/whitepapers/2000361-en.pdf

Doug Hanks
JNCIE-ENT #213, JNCIE-SP #875

Follow me on Twitter @douglashanksjr
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.