SRX Services Gateway
Reply
Trusted Contributor
SapphireNET
Posts: 154
Registered: ‎03-27-2008
0
Accepted Solution

Back to Basics

hi

 

I have my 240's clustered and the HA light is green!!

 

I have created a reth and redundancy group etc and when I pull the cable from node 0 it failsover to node1.

 

I have bound two gig interfaces to reth1 and given reth1 an IP in the trust zone.

 

but I cant ping it or get onto the web interface?

 

my config is attached.

 

any ideas as it must be somethign really dumb.

 

junos 10.0

 

thanks

 

 

 

 

JNCIS-M, JNCIS-SEC
Juniper Employee
igort
Posts: 19
Registered: ‎02-05-2009
0

Re: Back to Basics

Hi,

 

On the SRX240 ge-0/0/0 is dedicated as management port - fxp0  (ge-0/0/1 is control port - fxp1). Try to use other interface for the reth1.

 

Best regards,

 

Igor

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.