SRX

last person joined: 18 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  Back to Basics

    Posted 11-10-2009 01:19
      |   view attached

    hi

     

    I have my 240's clustered and the HA light is green!!

     

    I have created a reth and redundancy group etc and when I pull the cable from node 0 it failsover to node1.

     

    I have bound two gig interfaces to reth1 and given reth1 an IP in the trust zone.

     

    but I cant ping it or get onto the web interface?

     

    my config is attached.

     

    any ideas as it must be somethign really dumb.

     

    junos 10.0

     

    thanks

     

     

     

     


    #cluster
    #SRX240

    Attachment(s)

    txt
    wtf-2.txt   2 KB 1 version


  • 2.  RE: Back to Basics
    Best Answer

    Posted 11-10-2009 02:52

    Hi,

     

    On the SRX240 ge-0/0/0 is dedicated as management port - fxp0  (ge-0/0/1 is control port - fxp1). Try to use other interface for the reth1.

     

    Best regards,

     

    Igor