SRX Services Gateway
Showing results for 
Search instead for 
Do you mean 
Reply
Visitor
Posts: 6
Registered: ‎08-03-2017
0 Kudos

CONFIGURE ONE INTERFACE WITH BGP O A SRX 300

HI 

 

how can i configure one interface on bgp on my srx 

 

 

regards 

Highlighted
Distinguished Expert
Posts: 5,119
Registered: ‎03-30-2009
0 Kudos

Re: CONFIGURE ONE INTERFACE WITH BGP O A SRX 300

I assume you are looking to setup an eBGP peer using a connecting interface.  The configuration is done under protocols BGP and you simply use the interface address as the local address in that configuration with the peer address as the connected interface on the other device.

 

This is an example configuration.

 

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-peering.html

Steve Puluka BSEET
Juniper Ambassador
Senior IP Engineer - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
JNCIA-Junos JNCIS-SEC JNCIP-SEC JNCSP-SEC
JNCIS-FWV
JNCDA JNCDS-DC JNCDS-SEC
JNCIS-SP
ACE PanOS 6 ACE PanOS 7
http://puluka.com/home