08-12-2017 06:16 AM
I assume you are looking to setup an eBGP peer using a connecting interface. The configuration is done under protocols BGP and you simply use the interface address as the local address in that configuration with the peer address as the connected interface on the other device.
This is an example configuration.
Senior IP Engineer - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
JNCIA-Junos JNCIS-SEC JNCIP-SEC JNCSP-SEC
JNCDA JNCDS-DC JNCDS-SEC
ACE PanOS 6 ACE PanOS 7