SRX Services Gateway
Reply
Contributor
angelnegro27
Posts: 54
Registered: ‎03-19-2010
0
Accepted Solution

Could we have route-maps, next-hop in SRX? how i can do that?

Hello

 

I have two access to internet, one net "x" i can routed with the static route, i just need to configure one access-list for a secundary net "y" force to routed over the route-map with next-hop.

 

I have srx-240H running 10.1R1.8.

 

Thanks

 

Edgar Torres

 

Contributor
angelnegro27
Posts: 54
Registered: ‎03-19-2010
0

Re: Could we have route-maps, next-hop in SRX? how i can do that?

i just see the answer for the post

Policy Based Routing on the New SRX

i can use the pbr for this.

Visitor
ashu
Posts: 8
Registered: ‎03-18-2010
0

Re: Could we have route-maps, next-hop in SRX? how i can do that?

hello,

 

you can do use system IP and nex-hop your secound internet IP address

 

set routing-options static route 172.29.x.x/32 next-hop 172.29.83.97

 

Ashu

Trusted Expert
SSHSSH
Posts: 601
Registered: ‎11-21-2009
0

Re: Could we have route-maps, next-hop in SRX? how i can do that?

Hi angelnegro27 ,

You can do that using  Filter Based Forwarding ( FBF )

You will configure a firewall filter of type forwarding

here is an example :

http://forums.juniper.net/t5/SRX-Services-Gateway/filter-based-forwarding-question/m-p/27786

 

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.