05-19-2010 06:30 AM
I posted this in the VPN section which I think is the wrong section but I cant seem to delete the thread.
I'm pretty new to Juniper kit. I just got a SRX210 and I've got an issue with dynamic vpn and our rpc over http.
We currently only have one external IP and dynamic-vpn, webmail and rpc use port 443. I've managed to get our webmail to work on another port but RPC is a pain and wont work.
Does anyone know how to set dynamic vpn to work on another port?
05-19-2010 01:43 PM
You can change the port under system / services / web management / https / port - this will override the default of 443. NOTE this is for both dynamic-vpn and for regular https access to the SRX box. Both functions are covered by the web-management settings.
Works just fine.
JNCIS-ENT, FWV, SSL, WLAN
JNCIA-ER, EX, IDP, UAC, WX
Juniper Networks Certified Instructor
Juniper Networks Ambassador
Juniper Elite Reseller
J-Partner Service Specialist - Implementation
If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
05-20-2010 03:51 AM
Unfortunately I need the default https port to be 443 as outlook for rps over https wont let me set a port and hence uses the default and I have the same issue.
I may have to abandon dynamic VPN and set one of my windows servers to run a ipsec l2tp server and get the srx210 to forward traffic.
05-20-2010 04:25 PM
Is there a reason you don't just get a public ip block from your internet provider so you could run both?
Senior IP Engineer - DQE Communications Pittsburgh, PA
JNCIA-ER JNCIA-EX JNCIS-SEC JNCIP-SEC JNCSP-SEC
JNCIS-FWV JNCIS-SSL JNCDA
ACE PanOS 6
MCP - Managing Server 2003 MCP - Windows XP Professional
MCTS Windows 7