SRX

last person joined: 7 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  Egree Queue issues in SRX100

    Posted 08-08-2011 01:41

    Hi all,

     

    I would like to apply QoS settig on a SRX100. I have configured vlan default with l3-interface vlan.0 192.168.2.254/24. However, I display my QoS setting which limit a vlan.0 web outgoing is not work.

     

    Before, I configure the QoS setting, I attached a PC to the fe-0/0/3 and show interface queue fe-0/0/3, the output display queue 0 is alway zero.


    However, when I remove vlan.0 inet address and configure it in fe--0/0/3, and run show interface queue 0 fe-0/0/3 , it show queue 0 have increasing vlaue.

     

    Does QoS setting can apply in the vlan?  or just can apply on routed interface

     

     



  • 2.  RE: Egree Queue issues in SRX100

    Posted 08-16-2011 00:42

     

    Hi annpat, 
       

    Egress queues are not supported in vlan interfaces in Branch SRX. Pls track this with PR- 510568.

     

    Thanks,

    Prasanna



  • 3.  RE: Egree Queue issues in SRX100
    Best Answer

    Posted 08-16-2011 04:56
    @smprasanna wrote:

     

    Hi annpat, 
       

    Egress queues are not supported in vlan interfaces in Branch SRX. Pls track this with PR- 510568.

     

    Thanks,

    Prasanna

    This is SO typical for Juniper. You can configure unsupported features without getting an error.

     

    Why on earth would someone be able to configure egress queue on a vlan interface when it's not supported?