Good day Gents!
This is my very first post to this Forum, so sorry if this is answered elsewhere. I did used search, but I'm unable to find an answer is my setup possible.
OK... I want to interconnect two SRX 240 with G.SHDSL MPIM. I have tried some basic configuration steps that Juniper provides, but I cannot get the physical link up. Does normal Cat5e ethernet cable do the trick if I use one 8-wire type connection? Or do I have to change pin order in the cable? Or does those "line-cards" even support such a setup?
I am testing this setup first, because I got an order to make it work between SRX and Flexint22 device. However I'm not able to get none of them work...
BR,
JJ
Here's the config also:
XXXXX# show chassis
fpc 3 {
pic 0 {
shdsl {
pic-mode 1-port-atm ;
}
}
}
XXXXX# show interfaces at-3/0/0
encapsulation ethernet-over-atm;
atm-options {
vpi 0;
}
shdsl-options {
annex annex-b;
line-rate auto;
}
unit 3 {
encapsulation ether-over-atm-llc;
vci 0.100;
}
[edit]