I tried that and no help unfortunately. Here is what get after a boot and the resulting config. I have no idea if that Module Init thing is an issue. The config is just totally useless and I note that I dont see the physical interfaces as I would expect to when I do a show interfaces terse. Not very familiar with what I SHOULD see, but this doesnt seem to be right.
It was working with the 10xr1.8 (I think it was that) version prior to me deciding to upgrade the firmware. Do you think I could have a firmware that doesn't work on my SRX210H-P-MGW?
root@%
Message from syslogd@ at Jul 28 00:17:23 ...
SCHED: Thread 4 (Module Init) ran for 1496 ms without yielding
Message from syslogd@ at Jul 28 00:17:23 ...
Scheduler Oinker
Message from syslogd@ at Jul 28 00:17:23 ...
Frame 00: sp = 0x489de610, pc = 0x080294f4
Message from syslogd@ at Jul 28 00:17:23 ...
Frame 01: sp = 0x489de6b8, pc = 0x08013a08
Message from syslogd@ at Jul 28 00:17:23 ...
Frame 02: sp = 0x489de728, pc = 0x080151dc
Message from syslogd@ at Jul 28 00:17:23 ...
Frame 03: sp = 0x489de748, pc = 0x080103c0
Message from syslogd@ at Jul 28 00:17:23 ...
Frame 04: sp = 0x489de778, pc = 0x08028d4c
Message from syslogd@ at Jul 28 00:17:23 ...
Frame 05: sp = 0x489de7a0, pc = 0x00012060
root@% cli
root> show configuration
## Last commit: 2013-07-28 00:15:44 UTC by root
version 11.4R7.5;
system {
syslog {
user * {
any emergency;
}
file messages {
any critical;
authorization info;
}
file interactive-commands {
interactive-commands error;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
## Warning: missing mandatory statement(s): 'root-authentication'
}
root> show interfaces terse
Interface Admin Link Proto Local Remote
fxp2 up up
fxp2.0 up up tnp 0x1
gre up up
ipip up up
irb up up
lo0 up up
lo0.16384 up up inet 127.0.0.1 --> 0/0
lo0.16385 up up inet 10.0.0.1 --> 0/0
10.0.0.16 --> 0/0
128.0.0.1 --> 0/0
128.0.0.4 --> 0/0
128.0.1.16 --> 0/0
lo0.32768 up up
lsi up up
mtun up up
pimd up up
pime up up
pp0 up up
ppd0 up up
ppe0 up up
st0 up up
tap up up
vlan up down