I want to know two things.
1. How to confirm current size of RIB/FIB.
2. How to enhance these size to max. (SRX340/345)
According to datasheet (*), It is described as follows.
=====
Route scaling numbers are with enhanced route-scale features turned on
=====
(*)
https://www.juniper.net/assets/us/en/local/pdf/datasheets/1000550-en.pdf
I searched for the setting method for SRX, but I found only the one for the router as below.
[[Configuring the Junos OS to Allocate More Memory for Routing Tables, Firewall Filters, and Layer 3 VPN Labels]]
http://www.juniper.net/documentation/en_US/junos/topics/task/configuration/junos-software-jtree-memory-repartitioning.html
I searched for the command by referring to the above, but it seems that it can not be set with this method with SRX.
Best Regards,
GENC
======================================================
[edit]
root@srx-01# run show version
Hostname: srx-01
Model: srx340
Junos: 15.1X49-D75.5
JUNOS Software Release [15.1X49-D75.5]
[edit]
root@srx-01# set chassis ?
Possible completions:
> aggregated-devices Aggregated devices configuration
> alarm Global alarm settings
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
> cluster Chassis cluster configuration
> config-button Config button behavior settings
> disk-partition Chassis disk monitor configuration
> fpc Flexible PIC Concentrator parameters
> pseudowire-service Pseudowire L3 termination device configuration
> routing-engine Routing Engine settings
slow-pfe-alarm Enable slow (potential) PFE alarm
> usb USB control flags
[edit]
root@srx-01# help apropos enhanced
<<< snip >>>
set chassis memory-enhanced
Enhance memory allocation
<< snip >>>
[edit]
root@srx-01# set chassis memory-enhanced ?
Possible completions:
<[Enter]> Execute this command
| Pipe through a command
[edit]
root@srx-01# set chassis memory-enhanced route
^
syntax error
[edit]
root@srx-01# set routing-options rib ?
Possible completions:
<rib_name> Routing table name
inet.0 Routing table name
[edit]
root@srx-01# set routing-options fib
^
syntax error.
root@srx-01# set routing-options forwarding-table ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
+ export Export policy
indirect-next-hop Install indirect next hops in Packet Forwarding Engine
indirect-next-hop-change-acknowledgements Request acknowledgements for Indirect next hop changes
krt-nexthop-ack-timeout Kernel nexthop ack timeout interval (1..100)
no-indirect-next-hop Don't install indirect next hops in Packet Forwarding Engine
no-indirect-next-hop-change-acknowledgements Don't request acknowledgements for Indirect next hop changes
unicast-reverse-path Unicast reverse path (RP) verification
[edit]
root@srx-01# set forwarding-options ?
Possible completions:
> accounting Configure accounting of traffic
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
> dhcp-relay Dynamic Host Configuration Protocol relay configuration
> family Protocol family
> hash-key Select data used in the hash key
> helpers Port forwarding configuration
> load-balance Configure load-balancing attributes on the forwarding path
no-load-balance-label-capability Disable load balance label capability
> packet-capture Packet capture options
> port-mirroring Configure port mirroring of traffic
> sampling Statistical traffic sampling options
> storm-control-profiles Storm control profile for this instance
#SRX#15.1X49#branch