SRX

I can upgrade cluster SRX650 from version 10 to 11R6.6

I can upgrade onece for 2 node Right ?

or present way for upgrade software to me

thank you

Sittichai T.

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17235

This is the link to upgrade the cluster

Regards,

Sachin

Also I personally suggest

to upload the software on both the device and run this command

request system software add no-copy no-validate SOFTWARE-PATH

once the software is added

reboot node0 first and then Node1

Some downtime will be there...but it is fastest wayof upgrade..

Regards,

Sachin

---

@svaish wrote:

Also I personally suggest

 

to upload the software on both the device and run this command

 

request system software add no-copy no-validate SOFTWARE-PATH

 

once the software is added

 

reboot node0 first and then Node1

 

Some downtime will be there...but it is fastest wayof upgrade..

 

Regards,

Sachin

---

I read step below,

1. Install the software on each cluster member (on node0 and node1), using the CLI command (but don't reboot):
   
   request system software add <JUNOS package> no-validate no-copy unlink
   Note:  Don't reboot until you have performed the above command on each cluster member.

**** can be upgrade node 1 and node 2 right ?

1. Simultaneously, at the same time, enter the following command on each node:
   
request system reboot


this request cluster system reboot or node 1 reboot and node 2 reboot   auto or manul ? 

Please explaned step after add software 

Thank you

Regrads,

Sittichai T,