SRX

last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  Juniper SRX To Track IP Reachability for Automated Static Route Removal

    Posted 03-04-2015 07:02

    Can I please ask how many ways there are to achieve this?. 

     

    RPM and/or FBF...

    any other options avoiding dynamic RPs ?

     

    All traffic from data/voice network goto DC1, but if VPN endpoint IP dies then route to DC2

     

    Capture.PNG

     



  • 2.  RE: Juniper SRX To Track IP Reachability for Automated Static Route Removal
    Best Answer

    Posted 03-05-2015 05:28

    If you are using site to site VPN with Routed mode you can use two static route with different preference value for DC1 and DC2 tunnels, the tunnel with lower static route preference will carry all the traffic, if this tunnel went down this route will be remove from the routing table and the other tunnel will carry the traffic at that time............

     



  • 3.  RE: Juniper SRX To Track IP Reachability for Automated Static Route Removal

    Posted 03-05-2015 06:20

    Makes sense. floating statics 🙂

     

    The design requirments in this case must monitor specific addresses. We want to 'track' IPs few hops further down into the DC network environments.

     

    Cheers : )