Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
HI all,
I want know about Link aggregation on SRX Firewall
Is all device SRX support Link aggregation?
Could you give me example config that or link kb for that?
Thanks
F
Yes SRX does support link aggregation both in standalone mode and chassis cluster (HA) mode.
Here is the document;
http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-swconfig-interfaces/config-aggregated_ethernet-chapter.html
Here is another KB that talks about the difference of concepts between AE interface and RETH interface (which automatically does link aggregation).
http://kb.juniper.net/InfoCenter/index?page=content&id=KB22474&actp=RSS
Hope that helps.
Hi imirza,
After I'm read KB22474,
So, SRX only supported Link aggregation when that's cluster
If we use standalone, can do it?
In my illustrates is :
switch cisco connected SRX use port-channel on switch cisco
As per my previous reply, the answer is yes, it does support in standalone mode as well. You'd have to configure AE interfaces on SRX. Take a look at the configuration example in the link that I posted before;
http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-swconfig-interfaces/config-aggregated-ethernet-interfaces-section.html#config-aggregated-ethernet-interfaces-section
Oh, oke thanks for your information
Regards