SRX

HI all,

I want know about Link aggregation on SRX Firewall

Is all device SRX support Link aggregation?

Could you give me example config that or link kb for that?

Thanks

F

Yes SRX does support link aggregation both in standalone mode and chassis cluster (HA) mode.

Here is the document;

http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-swconfig-interfaces/config-aggregated_ethernet-chapter.html

Here is another KB that talks about the difference of concepts between AE interface and RETH interface (which automatically does link aggregation).

http://kb.juniper.net/InfoCenter/index?page=content&id=KB22474&actp=RSS

Hope that helps.

Hi imirza,

After I'm read KB22474,

So, SRX only supported Link aggregation when that's cluster

If we use standalone, can do it?

In my illustrates is :

switch cisco connected SRX use port-channel on switch cisco

Thanks

F

As per my previous reply, the answer is yes, it does support in standalone mode as well. You'd have to configure AE interfaces on SRX. Take a look at the configuration example in the link that I posted before;

http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-swconfig-interfaces/config-aggregated-ethernet-interfaces-section.html#config-aggregated-ethernet-interfaces-section

Oh, oke thanks for your information

Regards

F