SRX Services Gateway
Reply
Contributor
AidanOS
Posts: 47
Registered: ‎09-27-2009
0

Log errors and connectivity loss with 11.2R3

Has anyone else seen the following log errors and experienced connectivity loss (both web access through and SSH to the SRX) with 11.2R3?

 

Oct 21 21:51:38  srx100h init: l2cpd-service (PID 1235) started
Oct 21 21:51:44  srx100h init: l2cpd-service (PID 1235) exited with status=0 Normal Exit
Oct 21 21:51:44  srx100h init: l2cpd-service is thrashing, not restarted
Oct 21 21:51:46  srx100h init: l2cpd-service (PID 1239) started
Oct 21 21:51:46  srx100h init: can not access /usr/sbin/hostname-cached: No such file or directory
Oct 21 21:51:46  srx100h init: hostname-caching-process (PID 0) started
Oct 21 21:51:46  srx100h init: can not access /usr/sbin/ipmid: No such file or directory
Oct 21 21:51:46  srx100h init: ipmi (PID 0) started
Oct 21 21:51:52  srx100h init: l2cpd-service (PID 1239) exited with status=0 Normal Exit
Oct 21 21:51:52  srx100h init: l2cpd-service is thrashing, not restarted
Oct 21 21:52:02  srx100h /kernel: RT_PFE: RT msg op 1 (PREFIX ADD) failed, err 5 (Invalid)
Oct 21 21:52:02  srx100h /kernel: STP: STP IPC op 1 (ForwardingState) failed, err 1 (Unknown)
Oct 21 21:52:02  srx100h /kernel: STP: STP IPC op 1 (ForwardingState) failed, err 1 (Unknown)
Oct 21 21:52:02  srx100h /kernel: GENCFG: op 2 (USP Blob) failed; err 7 (Doesn't Exist)
Oct 21 21:52:06  srx100h last message repeated 2 times
Oct 21 21:52:18  srx100h /kernel: STP: STP IPC op 1 (ForwardingState) failed, err 1 (Unknown)
Oct 21 21:52:19  srx100h last message repeated 7 times

 

Thanks.

Visitor
ScottyO
Posts: 5
Registered: ‎08-15-2011
0

Re: Log errors and connectivity loss with 11.2R3

Yes!  I'm getting almost exactly the same messages without switching subsystem or STP running on my SRX100's (chassie cluster)  Did you ever solve this?

Visitor
ScottyO
Posts: 5
Registered: ‎08-15-2011
0

Re: Log errors and connectivity loss with 11.2R3

Sorry, to add to this.  the VPN drops packets as does any packets addressed to the router, or any routing (NATting in my case) through the router.  It's as if the router goes down for a time when I see these messages (about once a day, lasts for about a minute)

Visitor
rdineen
Posts: 2
Registered: ‎02-10-2010
0

Re: Log errors and connectivity loss with 11.2R3

I am seeing the same on a SRX210 11.2R2.4 non-clustered box.  Mine just rebooted after 2 weeks of those messages.

Trusted Contributor
BenR
Posts: 89
Registered: ‎03-18-2010
0

Re: Log errors and connectivity loss with 11.2R3

[ Edited ]

I am seeing something similar on 11.2R4, has anyone opened cases on this?

 

New User
ESRG
Posts: 1
Registered: ‎01-27-2012
0

Re: Log errors and connectivity loss with 11.2R3

We are seeing this as well accompanied by lots of low_mem_signal_processes messages.  Spontaneous reboots occur about every other week.

 

SRX240 11.2R3

Contributor
dark1587
Posts: 63
Registered: ‎08-01-2008
0

Re: Log errors and connectivity loss with 11.2R3

We have hit the same issue as well. Only choice is to upgrade to 11.2R4 or watch the CPU spike and reboot.

---
JNCIE-SEC #69, JNCIP-ENT, JNCSP-SEC, JNCIS-SA, JNCIS-AC, JNCIA-IDP, JNCIA-WX
Visitor
ScottyO
Posts: 5
Registered: ‎08-15-2011
0

Re: Log errors and connectivity loss with 11.2R3

On my SRX100's, I rolled back to 10.4R6.5 and it has been as solid as a rock for a few months now.

ld
Visitor
ld
Posts: 1
Registered: ‎12-14-2010
0

Re: Log errors and connectivity loss with 11.2R3

Unable to ssh via Radius to the srx110. Software running on the device is 11.2R3.3

 

May 29 15:19:17  AUBBAUBSR001 init: l2cpd-service is thrashing, not restarted

May 29 15:19:47  AUBBAUBSR001 init: l2cpd-service (PID 70309) started

May 29 15:19:47  AUBBAUBSR001 init: can not access /usr/sbin/hostname-cached: No such file or directory

May 29 15:19:47  AUBBAUBSR001 init: hostname-caching-process (PID 0) started

May 29 15:19:48  AUBBAUBSR001 init: can not access /usr/sbin/ipmid: No such file or directory

May 29 15:19:48  AUBBAUBSR001 init: ipmi (PID 0) started

May 29 15:19:50  AUBBAUBSR001 init: l2cpd-service (PID 70309) exited with status=0 Normal Exit

May 29 15:19:50  AUBBAUBSR001 init: l2cpd-service (PID 70311) started

May 29 15:19:52  AUBBAUBSR001 init: l2cpd-service (PID 70311) exited with status=0 Normal Exit

 

Is this issue resolved in the JTAC recommended ver (11.2R6.3)

Contributor
CrytpoManiac
Posts: 16
Registered: ‎05-20-2009
0

Re: Log errors and connectivity loss with 11.2R3

[ Edited ]

FYI - I'm seeing the same error on two (independant, non-clustered) SRX 100s both running 12.1R3.5. Error being:

 

Sep 28 08:56:17  firewall-a init: l2cpd-service (PID 45596) exited with status=0 Normal Exit
Sep 28 08:56:17  firewall-a init: l2cpd-service (PID 45597) started
Sep 28 08:56:22  firewall-a init: l2cpd-service (PID 45597) exited with status=0 Normal Exit

...(service started / exited mesages repeat about a dozen times)...
Sep 28 08:56:22  firewall-a init: l2cpd-service is thrashing, not restarted

 

However, I'm not seeing crashes or reboots; just the error in logs.

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.