Hi guys,
I'm doing an upgrade remotely right now. I've done it many times sucessfully but this time the copy of the junos from node 0 to node 1 is failing as follows:
root@firewall01> file copy /var/tmp/junos-srxsme-10.4R9.2-domestic.tgz node1:/var/tmp/junos-srxsme-10.4R9.2-domestic.tgz
ssh: connect to host node1 port 22: Operation timed out
lost connection
error: put-file failed
error: could not send local copy of file
The cluster looks fine:
root@oot@firewall01> show chassis cluster status
Cluster ID: 1
Node Priority Status Preempt Manual failover
Redundancy group: 0 , Failover count: 1
node0 110 primary no no
node1 100 secondary no no
Redundancy group: 1 , Failover count: 5
node0 110 primary yes no
node1 100 secondary yes no
Redundancy group: 2 , Failover count: 5
node0 100 primary no no
node1 110 secondary no no
Redundancy group: 3 , Failover count: 5
node0 110 primary no no
node1 100 secondary no no
Redundancy group: 4 , Failover count: 5
node0 100 primary no no
node1 110 secondary no no
**************************************************************************************
root@firewall01> show chassis cluster interfaces
Control link 0 name: fxp1
Redundant-ethernet Information:
Name Status Redundancy-group
reth0 Down Not configured
reth1 Up 1
reth2 Up 2
reth3 Down Not configured
reth4 Up 4
reth5 Down Not configured
reth6 Down Not configured
reth7 Down Not configured
Interface Monitoring:
Interface Weight Status Redundancy-group
ge-5/0/4 255 Up 1
ge-0/0/4 255 Up 1
Any ideas what might be wrong?
Many thanks 🙂