SRX Services Gateway
Reply
Super Contributor
colemtb
Posts: 313
Registered: ‎09-30-2009
0
Accepted Solution

More SRX210 to NSMExpress Appliance running 2009.1 question...

[ Edited ]

I followed the direction in the previous post and entered in all the services outbound-ssh client nsm commands, however; the device doesn't appear to attemp on first connect and my log shows the following... ?

 

Protocol major versions differ for 10.0.0.249: SSH-1.5-OpenSSH_4.4 vs. SSH-2.0-libssh2_0.14

 

I am running version JUNOS Software Release [9.5R1.8], is that the problem?

Message Edited by colemtb on 09-30-2009 02:28 PM
Distinguished Expert
Screenie
Posts: 1,083
Registered: ‎01-10-2008
0

Re: More SRX210 to NSMExpress Appliance running 2009.1 question...

Are you running the export version? That version has SSH version 1, NSM uses version two. Try a upgrade to domestic, you can download it from support pages.
best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.