I'm trying to work out this issue that keeps showing up with branch location. The branch locations are using SRX210HE with 11.4R7.5. The issue is when I do a ping from the device out I get some strange results. The results aren't the same for every host I attempt to ping. I've changed the DNS being used by the device to multiple other DNS that I know but with the same result. I'm curious to find out if anyone has run into this and what they did to fix it. Or, I'm being a complete noob and missed something simple.
Here's the output of the devices:
user@branch-1> ping juniper.net rapid count 5
PING juniper.net.badcock.com (67.192.177.252): 56 data bytes
!!!!!
--- juniper.net.badcock.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max/stddev = 49.893/53.226/61.577/4.254 ms
user@branch-1> ping google.com rapid count 5
PING6(56=40+8+8 bytes) :: --> 2607:f8b0:4008:805::1006
ping: sendmsg: No route to host
ping6: wrote google.com 16 chars, ret=-1
.ping: sendmsg: No route to host
ping6: wrote google.com 16 chars, ret=-1
.ping: sendmsg: No route to host
ping6: wrote google.com 16 chars, ret=-1
.ping: sendmsg: No route to host
ping6: wrote google.com 16 chars, ret=-1
.ping: sendmsg: No route to host
ping6: wrote google.com 16 chars, ret=-1
.
--- google.com ping6 statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
The best part is I've never configured IPv6 on any interfaces or put an IPv6 route on the device. The branch is able to complete a site-to-site tunnel and surf the web with no issues. I also put a SRX240 with version 11.4R2.14 on a test connection and I'm seeing the same thing.