Hi
I want to collect nflows from my srx cluster to nflow collector.I have configured srx as follows
> show configuration forwarding-options
sampling {
input {
rate 100;
}
family inet {
output {
flow-inactive-timeout 15;
flow-active-timeout 60;
flow-server 10.10.1.252 {
port 9995;
source-address 10.10.1.1;
version 5;
}
}
}
}
> show configuration interfaces reth5
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family inet {
filter {
input from_internet;
}
sampling {
input;
output;
}
address x.x.x.x;
}
}
but the nflow collector show very high values for ingress and egress traffic on all interfaces.This configuration works fine
for non clustered srx240.Is there any workaroudn for chasis cluster ?
thanks