SRX

last person joined: 20 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  SRX 650 Node reboot?

    Posted 11-13-2012 21:13

    Does anyone know what firmware release the rebooting of a single node on a SRX650 cluster was introduced? I tried with the earlier 10 firmware and current JTAC recommendation and it does not appear to be supported as yet

    root@xxxxx> request system reboot node 1  
    error: command is not valid on the srx650

    {primary:node0}
    root@aflcrows> show system software
    node0:
    --------------------------------------------------------------------------
    Information for junos:

    Comment:
    JUNOS Software Release [11.4R5.5]



    node1:
    --------------------------------------------------------------------------
    Information for junos:

    Comment:
    JUNOS Software Release [11.4R5.5]



    {primary:node0}
    root@xxxxx>



  • 2.  RE: SRX 650 Node reboot?

    Posted 11-13-2012 21:51

    Hi,

     

    I don't know exactly but I will till you have usually I reboot node 1 if needed

     

    1- from console on node 1 then normal reboot

     - request system reboot

     

     

    2- request routing-engine login node 1 -------> complete command as (node 1) is hidden

     - request system reboot

     

     

    Mohamed Elhariry

     

    JNCIE-M/T # 1059, CCNP & CCIP

     

    ----------------------------------------------------------------------------------------------------------------------------------------

    If this post was helpful, please mark this post as an "Accepted Solution". Kudos are always appreciated!



  • 3.  RE: SRX 650 Node reboot?

    Posted 11-13-2012 21:52

    Yeh thats what I have been doing in the past... Just client knows about this command and wants it!