SRX Services Gateway
Reply
Contributor
Johnny-come-lately
Posts: 58
Registered: ‎08-29-2009
0

SRX connection error (just after booting)

Hi everyone

I just upgrade JUNOS to JUNOS 10.3R1.9 but after booting

It occurred error continuously as below

 

UK_Seoul_Office (ttyu0)

login: root
Password:

--- JUNOS 10.3R1.9 built 2010-12-07 14:38:06 UTC
root@UK_Seoul_Office% cli
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
could not open user interface connection: management daemon not responding
Retry connection attempts ? [yes,no] (yes) yes
root@UK_Seoul_Office>
Message from syslogd@UK_Seoul_Office at Dec  7 14:46:54  ...
UK_Seoul_Office UK_Seoul_Office SCHED: Thread 4 (Module Init) ran for 1210 ms without yielding

Message from syslogd@UK_Seoul_Office at Dec  7 14:46:54  ...
UK_Seoul_Office UK_Seoul_Office Scheduler Oinker

Message from syslogd@UK_Seoul_Office at Dec  7 14:46:54  ...
UK_Seoul_Office UK_Seoul_Office Frame 00: sp = 0x48894420, pc = 0x0801f08c

Message from syslogd@UK_Seoul_Office at Dec  7 14:46:54  ...
UK_Seoul_Office UK_Seoul_Office Frame 01: sp = 0x488944c8, pc = 0x0800c180

Message from syslogd@UK_Seoul_Office at Dec  7 14:46:55  ...
UK_Seoul_Office UK_Seoul_Office Frame 02: sp = 0x48894538, pc = 0x0800d284

Message from syslogd@UK_Seoul_Office at Dec  7 14:46:55  ...
UK_Seoul_Office UK_Seoul_Office Frame 03: sp = 0x48894558, pc = 0x08009c58

Message from syslogd@UK_Seoul_Office at Dec  7 14:46:55  ...
UK_Seoul_Office UK_Seoul_Office Frame 04: sp = 0x48894588, pc = 0x0801ea6c

Message from syslogd@UK_Seoul_Office at Dec  7 14:46:55  ...
UK_Seoul_Office UK_Seoul_Office Frame 05: sp = 0x488945b0, pc = 0x4888c588


root@UK_Seoul_Office>

 

Anyone have any idea or suggestion for solving this issue?

Thank you

 

Best Regards

 

Jeff D. LEE 

Contributor
IanK
Posts: 77
Registered: ‎10-09-2008
0

Re: SRX connection error (just after booting)

I am seeing same issue on SRX210 running 10.4.6 . when trying to login from console when user prompt is availble .. any ideas here ?

Trusted Contributor
Ozark777
Posts: 115
Registered: ‎01-06-2010
0

Re: SRX connection error (just after booting)

Is there a USB stick in the SRX?  I've seen these cause problems during boot sequences.

 

I've also seen where rebooting doesn't work, but unplugging for about 1 minute does.

-------------------------------------------------------------------------------
Ben Boyd
Sr. Solutions Architect
Integration Partners (http://www.integrationpartners.com)
JNCIE-M, JNCIE-ENT, JNCIP-SEC, JNCIA-EX
Twitter - @ozark46
Visitor
ScottyO
Posts: 6
Registered: ‎08-15-2011
0

Re: SRX connection error (just after booting)

I've got some SRX 100's in a lab becomming unresponsive.  I get this same error when trying the exact same thing in single user mode.  Has there been a solution to this?

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.