SRX

last person joined: 19 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  SRX dynamic-vpn address-assignment and log view

    Posted 02-28-2013 19:40

    Hello,

              For SRX dynamic-vpn, I have configured address-assignment pool, which command I can use to check which IP address in pool was assigned. And  which log file can record log about dynamic-vpn, because I have configured 'log session-init and session-close' in dynamic-vpn policy, but there's no any log be recorded.



  • 2.  RE: SRX dynamic-vpn address-assignment and log view
    Best Answer

    Posted 03-01-2013 07:13

    Hi,

     

    To see the assigned IP addresses try the following:

     

    user@srx>show security ike active-peer

     Also in your logs, you should see something like the following:

     

    DYNAMIC_VPN_AUTH_OK: user testuser with remote IP 123.123.123.123 authenticated successfully.

     

    Your logging levels may not be set up correctly.  Have a read below:

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB16502

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB16509