04-29-2011 11:53 PM
All the sales literature and even your latest "Junos Security" (http://www.amazon.com/Junos-Security-Rob-Cameron/d
Is that the case in Junos 10.4?
We really need this support...
Thanks for your help,
04-30-2011 12:50 AM
According to the following datasheet http://www.juniper.net/us/en/local/pdf/datasheets/
So i would assume that, like every other SRX, you have integrated to the Junos software a license for 2 APs
05-02-2011 08:16 AM
Actually i just got bery confused myself...
i just found on this link http://www.juniper.net/techpubs/en_US/junos11.1/in
AX411 Access Point Hierarchy
- On SRX100 devices, there are CLI commands for wireless LAN configurations related to the AX411 Access Point. However, at this time, the SRX100 devices do not support the AX411 Access Point.
What i find quite unclear is if AX411 was supported on the SRX100 in 10.4 and not yet supported in 11.1
Or if it was never supported
I believe my previous post and this post show rather contradicting information :/
05-02-2011 12:09 PM - edited 05-02-2011 12:13 PM
I think both references you cite are accurate:
1) SRX100 _will_ support up to 4 AP's
2) Support for AX411 is, per the datasheet a "1H10" item (which would imply Junos 11.2 given that it's not in 11.1) (edited typo of 2H10)
We'll use the KB I mentioned to serve as notification for any updates.
05-02-2011 02:29 PM - edited 05-02-2011 02:30 PM
My confusion comes from the first link which seems official to me and says the SRX100 supports up to 4 APs on the Junos 10.4
It's on page 9 of the document
05-03-2011 10:13 AM - edited 08-25-2011 05:16 PM
Following is the list of maximum number of supported APs wtih different SRX platforms.
SRX100-2 access points
SRX210-4 access points
SRX220-4 access points
SRX240-4 access points
SRX650-4 access points
Ax-411 support on SRX branch is limited to maximum of 4 APs, except SRX 100 which supports 2 APs (by default and no license is required). SRX 210, 220, 240, and 650 supports 4 APs (2 by default + 2 with license)
This document http://www.juniper.net/us/en/local/pdf/datasheets/
hope this helps.
07-17-2011 12:07 PM
I'm not absolutely clear on this.
Can you please help me?
Can I connect the AX411 to an SRX100 and work a wireless network on it?
Thanks a lot for your time and help,
07-19-2011 02:12 AM
Ax411 on SRX100 is not officially supported/qualified yet. However WLAN CLI's are available for SRX100 from 10.4 onwards and it can mange 2 Ax411 APs by default (i.e. no license is needed).
AFAIK A411 on SRX100 would be officially supported from 11.2R2.
07-19-2011 12:00 PM
I checked the KB article and SRX100 is still not listed... would it be a problem some of these units for branch offices where I need the ax411?
Can I manage ax411 from srx240 placed in a different location over vpn? if so, how?
08-25-2011 04:55 PM
Check the kb again, it is updated now with the current and future support for APs with different platforms.
05-25-2012 07:30 AM - edited 05-25-2012 07:31 AM
I wanna ask something, does SRX support any Wireless lan connection except for the AX411 ,becuase i want to try another brands such as TPLINK or Netgear and and see if the web authentication works fine with it or not ??
do you have any idea ??