SRX Services Gateway
Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
New User
Posts: 3
Registered: ‎06-21-2017
0 Kudos
Accepted Solution

SRX210 Multicast PIM

I have been able to pass multicast traffic from one srx210 to another and all works well in only one direction. Is there a way to pass the multicast trafic between srx's in both directions = senders and receivers on both internal subnets? Thanks inadvance for any help.

Distinguished Expert
Posts: 573
Registered: ‎08-23-2015
0 Kudos

Re: SRX210 Multicast PIM

Hello,

 

So if I understand correctly, you have multicast sources on each side.

If that is the case, I am assuming they are sourcing traffic for distinct multicast group. Is that correct?

 

Regards,

 

Rushi

New User
Posts: 3
Registered: ‎06-21-2017
0 Kudos

Re: SRX210 Multicast PIM

If I am understanding correctly, yes.  Same group. The devices on the trusted internal networks of each one of the srx210's send and receive multicast traffic.  The group / multicast adress 225.8.11.8, is the same on all those devices.  It can changed, if needed.

Distinguished Expert
Posts: 573
Registered: ‎08-23-2015
0 Kudos

Re: SRX210 Multicast PIM

Hello,

 

If multicast group is same on the source on either side, why would devices behind SRX1 will use source which is behind SRX2 & vice versa?

 

If multicast source behind SRX1 uses Group 1 while source behind SRX2 uses Group2, then it make sense & it can be achieved theoretically.

 

Regards,

 

Rushi

New User
Posts: 3
Registered: ‎06-21-2017
0 Kudos

Re: SRX210 Multicast PIM

It is for rf radio traffic. Srx1 site receives signal and multicasts it out
to other sites (srx2, and srx3, etc), other sites receive multicast and
need to be able to respond with multicast back to srx1 site - the same way.
I am completely open to testing it the way you are thinking... Let's see if
I am getting this right: srx1 site gets signal and multicasts it out in
group 225.0.0.1, srx2 and srx3 sites receive and are able to respond back
to srx1 site via multicast group 225.0.0.2.
If I am understanding right, a multicast group per direction of traffic? If
that would work, that would be great!
Contributor
Posts: 26
Registered: ‎02-03-2015
0 Kudos

Re: SRX210 Multicast PIM

Isn't PIM an ipv6 address. IGMP is ipv4 address.