SRX

last person joined: 14 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  SRX210He2 power cable?? Kettle or Figure 8?

    Posted 09-26-2014 05:06

    Hi All,

     

    Quick little question which I cannot find the answer to in Juniper's technical documentation:

     

    Does anyone know what type of power cable is used for the SRX210He2 power supply? is it C13 (Kettle) or C7 (figure 8)??

     

    Many Thanks!

     

    Tom Whittle



  • 2.  RE: SRX210He2 power cable?? Kettle or Figure 8?

    Posted 09-26-2014 05:34

    Hi  Tom ,

     

    Please refer the link:

     

    http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/specifications/services-gateway-srx210-2g-verifying-parts-received.html

     

     

    • Power supply adapter (60 watts for SRX210HE2)
    • Power supply adapter (200 watts for PoE models)

    1

    3-prong power cord

    1

    DB-9 to RJ-45 adapter, straight-through, 7 feet

    1

     

    Regards
    rparthi
     

    Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too



  • 3.  RE: SRX210He2 power cable?? Kettle or Figure 8?

    Posted 09-26-2014 07:58

    Hi,

     

    Many thanks for your response, which part were you refering to? was it the line:

    "3-prong power cord"

     

    I assume this means it is C13 but I just wish it said definitatly.

     

    I take it no-one has one handy which the can just verify?

     

    Thanks,

    Tom



  • 4.  RE: SRX210He2 power cable?? Kettle or Figure 8?

    Posted 09-26-2014 08:46

    Hi Thomas,

     

     

    Google 3-prong power cord" points to 3Pin . so it should  be C13 but not 100% certain.

     

    Regards
    rparthi
     

    Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too

     

      



  • 5.  RE: SRX210He2 power cable?? Kettle or Figure 8?
    Best Answer

    Posted 09-28-2014 01:44

    My SRX210HE2 power supply has a C13 connector.



  • 6.  RE: SRX210He2 power cable?? Kettle or Figure 8?

     
    Posted 09-28-2014 10:01

    And to be clear, 'kettle' refers to C15/C16 (notched) connector/inlet. C14 on SRX210 power brick is notchless.



  • 7.  RE: SRX210He2 power cable?? Kettle or Figure 8?

    Posted 09-29-2014 00:59

    Hi All,

     

    Thanks for your responses, C13 it is then!

     

    That's interesting about C15 / C16 being kettle I've always associated C13 / C14 with Kettle and C15 / C16 with the "enhanced kettle" for want of an actual term.

     

    Thanks for your help!

     

    Regards,

    Tom