Hi there,
I have four cables connecting two SRX240s (in a HA cluster) to two EX4200s (also clustered). The goal was to have aggregation & failover.
On the SRX side, they are all in reth0. On the EX side, they are all in ae0.
I cannot ping across from one device's IP to the other. Am I going about this the right way? Many thanks in advance for any help.
James
EX configuration:
chassis {
aggregated-devices {
ethernet {
device-count 1;
}
}
auto-image-upgrade;
}
interfaces {
...
ge-0/0/22 {
ether-options {
802.3ad ae0;
}
}
ge-0/0/23 {
ether-options {
802.3ad ae0;
}
}
...
ge-1/0/22 {
ether-options {
802.3ad ae0;
}
}
ge-1/0/23 {
ether-options {
802.3ad ae0;
}
}
....
ae0 {
aggregated-ether-options {
minimum-links 1;
lacp {
active;
}
}
unit 0 {
family inet {
address 1.50.73.194/28;
}
}
}
}
root@EX1> show lacp interfaces ae0
Aggregated interface: ae0
LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity
ge-0/0/22 Actor No No Yes Yes Yes Yes Fast Active
ge-0/0/22 Partner No No Yes Yes Yes Yes Fast Passive
ge-0/0/23 Actor No No Yes Yes Yes Yes Fast Active
ge-0/0/23 Partner No No Yes Yes Yes Yes Fast Passive
ge-1/0/22 Actor No No Yes Yes Yes Yes Fast Active
ge-1/0/22 Partner No No Yes Yes Yes Yes Fast Passive
ge-1/0/23 Actor No No Yes Yes Yes Yes Fast Active
ge-1/0/23 Partner No No Yes Yes Yes Yes Fast Passive
LACP protocol: Receive State Transmit State Mux State
ge-0/0/22 Current Fast periodic Collecting distributing
ge-0/0/23 Current Fast periodic Collecting distributing
ge-1/0/22 Current Fast periodic Collecting distributing
ge-1/0/23 Current Fast periodic Collecting distributing
SRX configuration:
interfaces {
...
ge-0/0/3 {
gigether-options {
redundant-parent reth0;
}
}
ge-0/0/4 {
gigether-options {
redundant-parent reth0;
}
}
...
ge-5/0/3 {
gigether-options {
redundant-parent reth0;
}
}
ge-5/0/4 {
gigether-options {
redundant-parent reth0;
}
}
...
reth0 {
redundant-ether-options {
redundancy-group 1;
lacp {
passive;
}
}
unit 0 {
family inet {
address 1.50.73.193/28;
}
}
}
}