SRX

Hi

Im primarily from a Cisco background so please forgive my ignorance.

We are proposing deploying 2 x SRX240 firewalls for a client ,(these will sit in front of 2 x Cisco ASA 5585-X firewalls).

Change tracking (and accounting of commands executed) on the Cisco platform is all being handled by Cisco ACS (version 5.x).

I know I can configure the SRX for Authentication and Authorization - But what about Accounting?

Ive seen some blogs where accounting hase been mentioned (but only with RADIUS not ACS) I can set the Cisco ACS to do both TACACS+ and RADIUS so thats fine,

My question is, how to I configure the SRX for Authentication, Authorisation AND Accounting via either ACS (if possible) or RADIUS (if thats my only option).

Many Thanks

Pete

www.petenetlive.com

Hi Pete

For Radius authentication please refer below:

http://www.juniper.net/techpubs/en_US/junos13.3/topics/task/configuration/radius-authentication-configuring.html

For Radius accounting please refer below:

http://www.juniper.net/techpubs/en_US/junos13.3/topics/example/radius-accounting-configuring-example.html

Regards,

Raveen

Raveen

Bingo - ThanQ

If ever you have a Cisco ASA problem  I hope I can return the favour 🙂

Pete

Thank you Pete for the offer!

Feel free to post any Junos related queries, there are lot of experts participating to answer promptly.

Regards,

Raveen