Hi everybody. I´m haveing some trouble with passing through a IPSec VPN tunnel. Network is, as follows:
VPN router1-->Internet-->Juniper SRX240-->VPN router2
My goal is just to let that VPN tunnel pass through the Juniper- I dont want to configure that VPN into Juniper, because I dont want to get access to that tunnel. So far I have tried the following:
IKE-ESP is allowed
I have tried allowing all incoming and outgoing traffic
Created st0.0 logical interface, assigned it to trust-zone and allowed all protocols
So far we have managed to get that tunnel up, but no traffic is active through that tunnel and from "VPN router1" side they saw, that Juniper is trying to establish IPSec connection (even though IPSec is not configured).
Any help would be appreciated!