SRX Services Gateway
Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
P1P
Visitor
Posts: 2
Registered: ‎03-19-2017
0 Kudos
Accepted Solution

SRX300 basic setup

[ Edited ]

Hi.

I am new to Juniper SRX300 and I am trying to setup this scenario:1.PNG

 

 

 

 

 

 

 

 

 

 

I want to ping each other, but I don't what I am doing wrong.

 

Help Please? Smiley Happy

 

Here is some of the configuration on SRX:
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.2/32;
}
}
}
ge-0/0/1 {
unit 0 {
family ethernet-switching {
vlan {
members vlan0;
}

 

Thank you.

Distinguished Expert
Posts: 1,004
Registered: ‎08-29-2013
0 Kudos

Re: SRX300 basic setup

you need to put the interfaces into any security zone. By default junos puts all interfaces in null zone and no traffic is allowed on null zone.

 

Try the below.

set security zones security-zone trust host-inbound-traffic system-services all
set security zones security-zone trust interfaces ge-0/0/0

commit

 

https://kb.juniper.net/KB16556

https://kb.juniper.net/KB15694

 

Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too
P1P
Visitor
Posts: 2
Registered: ‎03-19-2017
0 Kudos

Re: SRX300 basic setup

Thank you very much, it worked.

 

Anze