SRX

last person joined: 16 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  Source NAT is not working

    Posted 06-11-2015 12:03
      |   view attached

    Hi, I have a SRX 100 configurated with source NAT but this don´t working this is the configuration 

     

    set security nat source pool NAT address 181.49.220.0/28

    set security nat source rule-set ONETOONE from zone LAN

    set security nat source rule-set ONETOONE to zone WAN

    set security nat source rule-set ONETOONE rule RULENAT match source-address 192.168.193.0/24

    set security nat source rule-set ONETOONE rule RULENAT then source-nat pool NAT

    set security nat proxy-arp interface fe-0/0/7.254 address 181.49.220.1/28 to 181.49.220.15/28

     

    Can you help me ?

     

     

     

    Attachment(s)

    txt
    config_srx.txt   6 KB 1 version


  • 2.  RE: Source NAT is not working
    Best Answer

    Posted 06-11-2015 16:39

    Is your nat pool in the same subnet as your wan interface?  If not, you do not need the proxy-arp configuration.

     

    you should follow the steps outlined in this troubleshooting kb article.  Let us know at which step you get the unexpected results and what the data pulled from these troubleshooting steps that fail is.

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB21611