SRX Services Gateway
Reply
Contributor
machiasiaweb
Posts: 29
Registered: ‎06-13-2010
0

Traffic shaper applying for a range of IP with different class?

Hello,

 

Hello,

Is that any example to config the traffic shaper under COS applying for different of IP with different class?

Like this

LAN IP: 192.168.168.0/24
Destination: x.x.x.0/24 & y.y.y.0/24 & z.z.z.0/24

LAN IP <---> x.x.x.0/24 is max 1Mbps
LAN IP <---> y.y.y.0/24 & z.z.z.0/24 is max 2Mbps

Suppose all are same priority. Need control both incoming and outgoing bandwidth.

Thanks in advance!

Distinguished Expert
MMcD
Posts: 635
Registered: ‎07-20-2010
0

Re: Traffic shaper applying for a range of IP with different class?

Hi there,

 

There are loads of examples of COS out there.  Have a read here:

 

http://kb.juniper.net/InfoCenter/index?page=content&id=KB22066

 

 

MMcD [JNCIP-SEC, JNCIS-ENT, CCNA, MCP]
____________________________________________________

[Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too]
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.