SRX Services Gateway
Reply
Visitor
jjkemp
Posts: 1
Registered: ‎01-31-2012
0

Re: Upgrading to 10.3R1 . . . but I have no space!

sh system storage

request system storage cleanup

start shell

ls -all (delete everyting you see)

rm <filename>

exit

sh system storage

Trusted Contributor
michael.saw
Posts: 1,048
Registered: ‎09-26-2011
0

Re: Upgrading to 10.3R1 . . . but I have no space!

Hi all,

I'm currently using USB to upgrade the firmware version.
So far so good... and surprisingly it is quite fast...
Thanks!

Michael
JNCIA-JUNOS, JNCIS-ENT/SEC, JNCIP-ENT
(CCNA, ACMP, ACFE, CISE)
"http://www.thechampioncommunity.com/"
CONNECT EVERYTHING. EMPOWER EVERYONE.
Share & Learn. Knowledge is Power.

"If there's a will, there's a way!"
Contributor
trohit
Posts: 34
Registered: ‎08-23-2011
0

Re: Upgrading to 10.3R1 . . . but I have no space!

may be you can try:

cli >  request system storage cleanup

This deletes 

 

That should free up some space.

 

If that still doesn't work then you can try:

du -h /

and then try to free up space manually. 

 

 

 

 

 

All views and opinions shared are my own, unless they happen to be quotes, or links, naturally, of course.
Contributor
trohit
Posts: 34
Registered: ‎08-23-2011
0

Re: Upgrading to 10.3R1 . . . but I have no space!

Also useful to see the KB article:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB16652&pmv=print

All views and opinions shared are my own, unless they happen to be quotes, or links, naturally, of course.
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.