Hello everyone,
I have a little problem with a Site-to-Site VPN-configuration.
Scenario looks like this:
SRX110 with a fix WAN-IP
Third Party VPN Gateway with a dyanmic WAN-IP (so this gateway should initiate the connection)
The problem now is, that the third party VPN-Gateway only makes VPN in Main-Mode.
Therefor I also have to setup VPN-configuration on the SRX in Main Mode.
When I enter the WAN-IP as address on the srx in the configuration, which the Third-Party-VPN-Gateway actual has, the VPN comes up and works, but of course only 24 hours, until it gets a new WAN-IP.
Is there a way to make a VPN-Configuration on the SRX in main mode but with no address is set. I tried to setup 0.0.0.0 as address, but that doesn`t work. Can I enter a dyndns-name for address ?
Here the scenario:
[THIRD-PARTY-VPN-GATEWAY (using DYNAMIC WAN-IP] <------> [VPN via MAIN MODE] <--------> [SRX110 with fix WAN-IP]
thanks for your help