SRX

last person joined: 21 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  VRRP on SRX3600

    Posted 07-14-2013 23:27

    Hi all,

     

    I have configured VRRP on two SRX3600:

     

    1st:

    set interfaces ge-1/0/1 unit 2 vlan-id 2
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.254/24 vrrp-group 1 virtual-address 10.0.0.1
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.254/24 vrrp-group 1 priority 120
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.254/24 vrrp-group 1 preempt
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.254/24 vrrp-group 1 accept-data

     

    2nd:

    set interfaces ge-1/0/1 unit 2 vlan-id 2
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.253/24 vrrp-group 1 virtual-address 10.0.0.1
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.253/24 vrrp-group 1 priority 100
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.253/24 vrrp-group 1 preempt
    set interfaces ge-1/0/1 unit 2 family inet address 10.0.0.253/24 vrrp-group 1 accept-data

     

    The link between SRXs is leased line - Layer 2 ethernet.

    I can ping between two IPs and virtual IP 10.0.0.1, however both SRX are master and 2nd doesn't become backup.

    show vrrp extensive on both SRX  shows Advertisement sent increased, but Advertisement received - 0.

    Also ping to 224.0.0.18 (VRRP multicast) doesn't go.

     

    So what is problem?

     

    Thanks

     

     

     

     

     



  • 2.  RE: VRRP on SRX3600
    Best Answer

    Posted 07-15-2013 00:10

    Hi Harut,

     

    Maybe your leased line provider is dropping multicast L2 frames?

     

    Use "monitor traffic interface <your interface>" to see if the frames are being transmitted across your link.