SRX Services Gateway
Reply
Contributor
littlezip
Posts: 101
Registered: ‎01-09-2009
0

What means with these log ?

I have two SRX3600 with HA ,Version 10.0R1.8

now the decie general many same log

 

Jan 17 11:56:50 smf: smf_re_client_send_perfmon_data: ERROR - Unable to send msg, mtype=51, len=1056
Jan 17 11:56:51 smf: smf_msg_handler:receive message: type=51, subtype=2, length=1056
Jan 17 11:56:51 smf: smf_handle_spu_mon_data_reply: received snmp spu monitor data from node(2), num_entries=26
Jan 17 11:56:51 smf: smf_msg_handler:receive message: type=51, subtype=2, length=1056
Jan 17 11:56:51 smf: smf_handle_spu_mon_data_reply: received snmp spu monitor data from node(2), num_entries=26
Jan 17 11:56:51 smf: smf_re_snmp_send_perfmon_data:In cluster mode, (id=1, id=1) sending snmp perf mon data to peer RE
Jan 17 11:56:51 smf: smf_re_client_send_perfmon_data: Sending snmp perfmon data of from (chassis id=1)
Jan 17 11:56:51 smf: smf_ipc_err_handler: usp_ipc_client_send: failed to send message - type 1032, subtype 51

some body tell me what cause this log ? thank you.

Trusted Expert
Automate
Posts: 784
Registered: ‎11-01-2007
0

Re: What means with these log ?

I'm guessing...

 

You have a chassis cluster? They're not completely talking to one another maybe.. Are you having any trouble? How is the cluster connected (i.e though a switch?)

 

Thx

 

-Keith

Regular Visitor
bezeqint
Posts: 4
Registered: ‎05-04-2010
0

Re: What means with these log ?

 i have the same problem.

same 3600 cluster.

em0.0 connected trough fiber- directly.

fab0.0 connected to fab1.0 directly trough rj45 (on ports ge-0/0/5 to ge13/0/5 )

the cluster was working fine till something happend to main one, fail over and all is good.

dont know if this error is related or not.

same config cluster in lab has the same messeges. no problem over there.

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.