is it possible to adverise static routes into these?
we have some SOHO routers that come back to and SRX 240 ( about 30 of them
each SOHO bring up OSPF when the tunnle comes up this is so i dont have to put a bunch of static pointing to the ST0.x interfaces for all the /29s
I have a requirement to for some internet adds to come back here and go out a private connection to a vender, the SOHO boxes are trying to use the internet for this, makes sense.
I know i can fix this if i add the statics to the SOHO routers so that traffic goes of the tunnle, but it would be much cleaner and easier to update the list if I could put them on the 240 and use the OSPF that is already in place to do this
I have a tried a policy to redistrubte static but i have little expeance with stub networks, every place i have work in the past was always full mesh back bone.
Thanks for the help
240 (st0.0 to st0.36)
ospf {
export [ direct-opsf exportstatic1 ];
area 0.0.0.50 {
stub default-metric 1 no-summaries;
interface st0.1 {
interface-type p2p;
authentication {
area 0.0.0.0 {
interface vlan.0;
policy-statement direct-opsf {
term T1 {
from protocol [ direct static ];
}
}
policy-statement exportstatic1 {
term exportstatic1 {
from protocol static;
then accept;
SOHO
ospf {
area 0.0.0.50 {
stub;
interface st0.0 {
interface-type p2p;
authentication {
}
interface vlan.1;
interface lo0.0;