SRX Services Gateway
Reply
Regular Visitor
adele
Posts: 5
Registered: ‎11-29-2010
0
Accepted Solution

config command disappear?

I want to config per-packet load-balancing on my srx650 cluster,

but after logon the srx as root,

I found the option "per-packet" is not available under the [edit policy-options policy-statement xxx then load-balance] hierarchy level,

it said is has "No vaild completions"

 

now many part of the config is not configurable,

e.g. [edit security flow tcp-session]

even I can't change the firewall name too....

 

I am just a newbie to SRX(junos), Does anyone know a solution to my problem?

Contributor
pkcpkc
Posts: 89
Registered: ‎11-10-2010
0

Re: config command disappear?

load balancing is described here :

http://www.juniper.net/techpubs/en_US/junos10.3/topics/usage-guidelines/policy-configuring-per-packe...

 

which version of junos are you running ?

Regular Visitor
adele
Posts: 5
Registered: ‎11-29-2010
0

Re: config command disappear?

oh, no,

i think i made a very stupid mistake,

 

i should use "set", not "edit" to start with the config statement....XD

 

case closed, sorry for annoying

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.