SRX

Hi guys, 

I have a problem with the a srx 240 cluster, since a few days I noticed that the one process has high cepu utilization:

node0:
--------------------------------------------------------------------------
last pid:  1582;  load averages:  0.60,  0.77,  0.68  up 0+00:13:58    11:40:33
138 processes: 19 running, 107 sleeping, 1 zombie, 11 waiting

Mem: 161M Active, 94M Inact, 1011M Wired, 160M Cache, 112M Buf, 546M Free
Swap:


  PID USERNAME  THR PRI NICE   SIZE    RES STATE  C   TIME   WCPU COMMAND
 1366 root        7 139    0   994M 64108K CPU3   3  35:05 281.84% flowd_octeon_hm
   22 root        1 171   52     0K    16K RUN    0   8:25 63.13% idle: cpu0
 1580 sshd        1  81    0  7548K  1612K RUN    0   0:00  1.46% sshd

can anyone advice ?

thanks,

Dan

Hello ,

I see that Idle is almost 63% . Please share the output of  :

> show chassis routing-engine 

to confirm if there is actually high CPU . The flowd_octeon process will show these values . Its expected .

Routing Engine status:
    Temperature                 50 degrees C / 122 degrees F
    CPU temperature             48 degrees C / 118 degrees F
    Total memory              2048 MB Max  1065 MB used ( 52 percent)
      Control plane memory    1104 MB Max   420 MB used ( 38 percent)
      Data plane memory        944 MB Max   651 MB used ( 69 percent)
    CPU utilization:
      User                      12 percent
      Background                 0 percent
      Kernel                     6 percent
      Interrupt                  0 percent
      Idle                      83 percent
    Model                          RE-SRX240H2
    Serial ID                      ACLT4139
    Start time                     2015-07-24 01:23:25 PDT
    Uptime                         1 hour, 2 minutes, 42 seconds
    Last reboot reason             Router rebooted after a normal shutdown.
    Load averages:                 1 minute   5 minute  15 minute
                                       0.23       0.26       0.24

Hello ,

See the output and find that your Idle is 83% . So your device is running optimal and there is no High CPU .

The Flowd_octeon process shows values ranging in 1000s as % . Its expected and not an issue to worry .

thanks

Without going into that depth, notice your load averages:

load averages:  0.60,  0.77,  0.68  up 0+00:13:58    11:40:33

Those would be a lot higher if you were having high CPU.