SRX

last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  destination nat

    Posted 07-11-2014 00:31

    folks

     

    i'm hoping you can help with a question on destination nat

     

    i need to change the destination address as follows

     

    traffic from any source hits the firewall on its untrust interface with a destination address of 145.1.1.1

     

    145.1.1.1 is not on the firewall but is routable through the firewall's trust interface

     

    i need to change the destination address from 145.1.1.1 to 10.1.1.1

     

    can someone point me to a config guide please?

     

    i've this config is screenos no problem but i'm not as familiar with junos as yet

     

    thanks to anyone taking the time to read this



  • 2.  RE: destination nat
    Best Answer

    Posted 07-11-2014 00:40

    Hi

     

    Following KB article has the APP Note for destination and source Nat:

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=TN81&actp=LIST

     

    Regards
    rparthi
     

    Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too



  • 3.  RE: destination nat

    Posted 07-11-2014 03:43

    rparthi

     

    many thanks for your help

     

    its greatly appreciated