SRX Services Gateway
Reply
Contributor
allien
Posts: 21
Registered: ‎07-20-2010
0

dynamic vpn with AD

Dear All,

I want to test the dynamic vpn feature on srx240 using our two evaluation licenses. We are planning to purchase licenses after testing and will integrate it with our active directory. Can any one guide me where to start and share sample config (if possible)? Our srx240 is running 10.0R3.10.

 

 

 

Super Contributor
AdamLin
Posts: 167
Registered: ‎08-02-2010
0

Re: dynamic vpn with AD

Here's the appnote which shows you how to, I'd recommend to first upgrade to 10.4 though, makes the dynamic-vpn configuration make a bit more sense when it comes to more than one user.

 

http://kb.juniper.net/InfoCenter/index?page=content&id=TN7&actp=LIST

 

Regards,
Adam

(if my post helped solve your problem, mark it as accepted solution)
Contributor
allien
Posts: 21
Registered: ‎07-20-2010
0

Re: dynamic vpn with AD

In the appnote (http://kb.juniper.net/library/CUSTOMERSERVICE/GLOBAL_JTAC/technotes/dynamic-vpn-appnote-v12.pdf)for our SRX 240 on page # 8 it say to type a command:

# show access

however in our srx I cannot use this command (or run show access) as it is not a valid command, also there is nothing mentioned how to integrate it with windows active directory. Can any one (who has already done the same process which I am looking to do)  please help me?

 

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.