hi,all
how to clear security flow session based on ip address in one security policy?
I have one polciy which is used to block ip. Everytime when some add ip to the sourec-ip list,he also need to execute clear security flow session since these user are not network admin,I need to limit them only can clear syntax match the address set in the block policy.
@srwd00jfw040> clear security flow session ?
Possible completions:
<[Enter]> Execute this command
all Clear all sessions
application Application protocol name
application-firewall Show application-firewall sessions
destination-port Destination port (1..65535)
destination-prefix Destination IP prefix or address
family Protocol family
idp IDP sessions
interface Name of incoming or outgoing interface
nat Sessions with network address translation
protocol IP protocol number
resource-manager Sessions with resource manager
session-identifier Clear session with specified session identifier
source-port Source port (1..65535)
source-prefix Source IP prefix or address
tunnel Tunnel sessions
| Pipe through a command