SRX

Hi,

Does anybody knows how to use aux port on routing engine at srx3k?
Please teach me.

Regards,
GENC

{primary:node0}
root> show version
node0:
--------------------------------------------------------------------------
Model: srx3600
JUNOS Software Release [12.1X44-D40.2]

{primary:node0}
root> show configuration system ports

{primary:node0}
root>

http://www.juniper.net/techpubs/en_US/release-independent/junos/information-products/topic-collections/hardware/srx-series/SRX-3000-modules/srx1400-srx3400-srx3600-module-guide.pdf#jd0e2004

http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/specifications/services-gateway-srx3600-console-port-cable-wire-specifications.html

Hi Genc,

This may be helful information http://www.juniper.net/techpubs/en_US/junos14.2/topics/task/configuration/port-console-and-auxiliary-configuring.html

Thanks,

Suraj

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too

Hi rsuraj,

I had overlooked the following sentence.
I thought that it is enabled by default.

"The auxiliary port is disabled by default."

Hence, I've set it up, I was able to use the aux port.

Thank you for your kindness very much.

Regards,
GENC

{primary:node0}
root> show configuration system ports
auxiliary type vt100;

{primary:node0}
root> show system users
node0:
--------------------------------------------------------------------------
5:11AM up 18:31, 2 users, load averages: 0.02, 0.03, 0.00
USER TTY FROM LOGIN@ IDLE WHAT
root u0 - Tue10AM - cli
root u1 - 5:11AM - cli

{primary:node0}
root>