SRX

last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  is there any temporary solution for session table full

    Posted 02-08-2015 11:10
    SRX1400 session table is full ,but we still need some time tomake everything ready for update ,so is there temporary solution for it ?


  • 2.  RE: is there any temporary solution for session table full

     
    Posted 02-08-2015 14:41

    Depending on the traffic type and patterns, you can change default timeouts for applications and/or set accelerated aging time:

     

    http://www.juniper.net/techpubs/en_US/junos12.1/topics/concept/flow-processing-aggressive-session-aging-understanding.html



  • 3.  RE: is there any temporary solution for session table full

    Posted 02-08-2015 23:57

    got it .thanks .when i read the datasheet ,it says we can change the timeout value .considering the default value of tcp is 1800, i think it is a bit long ,how can i change ti .



  • 4.  RE: is there any temporary solution for session table full
    Best Answer

     
    Posted 02-09-2015 02:31

    Honestly, if I were you, I would start with the aggressive aging timers first.  It's an easier configuration and probably going to accomplish what you need.  However, if you do want to change the timeout settings, here's a KB that tells you how to do that:

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB28630