Hi,
The default load balance behavior is load balance per prefix which means if you have total 3 prefix so 1,3 will be in link 1 and prefix 2 will be on link 2
after applying this policy so you are using load balance per flow which means that all traffic with same source and destination will follow same path.
You can include also the port so your traffic is load balance flow based on 3 parameters same source/ destination and port will follow same path
so for example if u have remote destination your ping traffic may take another path than RDP traffic to same destination
you can refer to the following link also for more details
http://www.juniper.net/techpubs/en_US/junos12.2/topics/usage-guidelines/policy-configuring-per-packet-load-balancing.html
Regards,
Mohamed Elhariry
JNCIE-M/T # 1059, CCNP & CCIP
----------------------------------------------------------------------------------------------------------------------------------------
If this post was helpful, please mark this post as an "Accepted Solution". Kudos are always appreciated!