SRX

hello everyone,

i got a problem with my srx240.  Firewall seems to work normally, and i i do

root@firewall> show chassis hardware
node0:
--------------------------------------------------------------------------
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                AF4510AA0059      SRX240B
Routing Engine   REV 41   750-021792   AACX0854          RE-SRX240B
FPC 0                                                    FPC
  PIC 0                                                  16x GE Base PIC
Power Supply 0

error: Could not connect to node0 : No route to host

but every minute ethernet port stop blinking and i do again show chassis hardware i find this output...
node1:
--------------------------------------------------------------------------
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                                  SRX240B
FPC 0                                                    FPC
Power Supply 0

as you see i miss the 16 gigabit eht interfaces!

could it be an hardware or config problem?

thanks in advance!

Hello ,

It looks to be issue with hardware , but before confirming the same , I would suggest you to isolate the node1 from Cluster and make it stand alone and check if the interfaces shows up. If it does not , then confirmed HW issue . If it does , then I suspect to be a clustering or SW issue .

Thanks for reply Sam,

i'll do that 🙂

Hello ,

Thanks for the update . Let us know the outcome of the testing so that we can help .