Hi VinhNg,
You cannot configure ge-6/0/2 interface as both L3 interface & L2 interface at the same time.
Example:
root@SRX240PoE-6# show interfaces ge-0/0/0
unit 0 {
family inet {
address 10.204.115.128/24; <<<<<<<<<<<<<<<<<< L3 interface Type
}
family ethernet-switching { <<<<<<<<<<<<<<<<<<<< L2 interface type
vlan {
members test;
}
}
}
root@SRX240PoE-6# commit
[edit interfaces ge-0/0/0 unit 0]
'family'
When ethernet-switching family is configured on an interface, no other family type can be configured on the same interface.
error: configuration check-out faile
so remove either family ethernet-switching or family inet configuration for the interface ge-6/0/2
To check interface configuration: from the configuration mode , run this command: show interface ge-6/0/2
Regards
rparthi
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too