SRX

last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  srx-clustering-static routes-multiple-isps

    Posted 12-03-2014 09:55

    Hi,

     

    We have two seperate ISPs running to our SRX cluster. Everything works fine in a manual failover scenario. However, when monitor-interface configuration is triggered and RG1 failsover without RG0 I can no longer route to ISP(makes sense, node0 is still primary for RG).

     

    This made me think the way I have configured each node might be in error. Currently, I apply "routing-options static route 0/0 next-hop 1.1.1.1" to the node0 group and "routing-options static route 0/0 next-hop 2.2.2.2" to the node1 group, along with each respective ip address on ge-0/0/0 and ge-4/0/0. When the routing engine failsover; this works fine. However, I was thinking there might be a way to configure this cluster to support both ISPs without using group configurations.

     

    Any input is appreciated.

     

    Thanks!

     

     



  • 2.  RE: srx-clustering-static routes-multiple-isps
    Best Answer

    Posted 12-03-2014 10:21

    Fixed: Removed individual group configs for name-servers and static 0/0 route. Added static routes with preference and all name-servers to main config.